System Requirements; How To Login The Web-Based Interface - Korenix JetWave 2800 Series User Manual

Wireless Security
MESH Setup
WMM Setup
Bandwidth Control
Profile Setup
SNMP
System Log
Certificate management

System Requirements

Before configuration, please make sure your system meets the following requirements:
A computer coupled with 10/100/1000 Base-T(X) adapter;
Configure the computer with a static IP address of 192.168.1.x, as the default IP address of
JetWave 2800 is 192.168.1.1 (X cannot be 0, 1, nor 255);
A Web browser on PC for configuration such as Microsoft Internet Explorer 6.0 or above,
Netscape or Firefox.

How to Login the Web-based Interface

The JetWave 2800 provides you with user-friendly Web-based management tool.
Open IE and enter the IP address (Default: 192.168.1.1) of JetWave 2800 into the address field.
You will see the WELCOME page as below.
Chapter 3 Basic Settings
RTS
Fragmentation
Limited Data Rate
Multicast Rate
Rate Adaption
VLAN
Client Numbers
Client Isolation
Bandwidth Profile
SSID
MAC Filter
Security
Radio
Enable
Profile ID
Mode
Syslog Level
Remote logging
Remote IP
2312
2346
Auto
Auto
Default
ID: 0, Priority: 0
64
Off
0-Disable
wireless_1
Disable
Disable
Disable
Radio 1
NO
1
Disable
Disable
Informational
Diable
0.0.0.0
Empty
Page 15