Korenix JetWave 2450 Series User Manual page 39

Link Integration
Available under AP/Bridge/AP repeater mode, it monitors the connection on the Ethernet port by
checking "Enabled". It can inform the associating wireless clients as soon as the disconnection
occurs.
Max. Station Num
Available only under AP mode, it defines the maximum amount of wireless clients allowed to be
connected.
Space in Meter/ACK Timeout
To decrease the chances of data retransmission at long distance, the JetWave 2450 can
automatically adjust proper ACK timeout value by specifying distance of the two nodes.
Flow Control
It allows the administrator to specify the incoming and outgoing traffic limit by checking "Enable
Traffic Shaping". This is only available in Router mode.
Note:
We strongly recommended you leave most advanced settings at their defaults except
"Distance in Meters" adjusted the parameter for real distance; any modification on them
may negatively impact the performance of your wireless network.
Chapter 4 Advanced Settings Page 29