Pole Mounting; Figure 8 Pole Mounting – Step 1; Figure 9 Pole Mounting – Step 2 - Korenix JetWave 2450 Series User Manual

Pole Mounting

1. Turn the JetWave 2450 over. Put the pole mounting ring through the middle hole of it. Note that
you should unlock the pole mounting ring with a screw driver before putting it through JetWave
2450 as the following right picture shows.
2. Mount JetWave 2450 steadily to the pole by locking the pole mounting ring tightly.
Chapter 2 Hardware Installation
Figure 8 Pole Mounting – Step 1
Figure 9 Pole Mounting – Step 2
Page 10