Time Settings
Compliant with NTP, the JetWave 2450 is capable of keeping its time in complete accord with the
Internet time. Make configuration in "Time Settings" from "System". To use this feature, check
"Enable NTP Client Update" in advance.
Time Zone Select
Select the time zone from the dropdown list.
Time Server
Select the time server from the "NTP Server" dropdown list or manually input the IP address of
available time server into "Manual IP".
Hit "Apply" to save settings.
Firewall Settings
The firewall is a system or group of systems that enforce an access control policy between two
networks. It may also be defined as a mechanism used to protect a trusted network from an un-trusted
network. JetWave 2450 has capabilities of Source IP Filtering, Destination IP Filtering, Source Port
Filtering, Destination Port Filtering, Port Forwarding and DMZ. This is available only under Router
Mode.
Chapter 3 Basic Settings
Figure 18 Time Settings
Page 20