Table of Contents
Advertisement
Chapter 3 Web Settings
The Web Setting is applied to JetWave 2700/2800 Series.
The MESH and Roaming features are applied to specific models. The JetWave 2700/2800-M means
MESH mode, it supports wireless Mesh network and Fast Roaming feature.
Factory Default Settings
We'll elaborate the JetWave 2800 factory default settings. You can re-acquire these parameters by
default. If necessary, please refer to the "Administration".
Table 1 JetWave 2800 Factory Default Settings
Features
Username
Password
Language
Device Name
System Operation Mode
IP Setup
Spanning Tree Protocol
Ethernet Link Speed
DHCP Server
Management VLAN
Radio Setup
Radio - 1/2
WLAN Setup
Radio-1/2
Chapter 3 Basic Settings
IP Address
Subnet Mask
Gateway
Primary DNS Server
Secondary DNS Server
Wireless Band
Channel
Transmission Power
Antenna Number
Short Guard Interval
Aggregation
Distance (x100m)
SSID
Enable
WLAN Mode
Factory Default Settings
admin
admin
English
FSA
Bridge
192.168.1.1
255.255.255.0
0.0.0.0
0.0.0.0
0.0.0.0
Off
Auto
Off
0 (Disable)
802.11ng HT20
Radio 1: 1 CH - 2412MHz
Radio 2: 6 CH - 2473MHz
Full
2
On(400ms)
Enable
0
Radio 1: wireless_1
Radio 2: wireless_2
(Broadcast Enable)
Yes
Access Point
Page 14
Advertisement
Table of Contents
