Call-In/Call-Out Setup Menu; Modem Configuration Menu - IBM RS/6000 User Manual

Note: Your ASCII terminal must support the ISO-8859 character set to correctly display

Call-In/Call-Out Setup Menu

This menu is used to configure a modem for the service processor to use to support the
system.

1. Modem Configuration Menu

2. Serial Port Selection Menu
3. Serial Port Speed Setup Menu
4. Telephone Number Setup Menu
5. Call-Out Policy Setup Menu
6. Customer Account Setup Menu
7. Call-Out Test
8. Ring Indicate Power-On Menu
98. Return to Previous Menu
99. Exit from Menus
1>
v Modem Configuration Menu, see "Modem Configuration Menu".
v Serial Port Selection Menu, see "Serial Port Selection Menu" on page 55.
v Serial Port Speed Setup Menu, see "Serial Port Selection Menu" on page 55.
v Telephone Number Setup Menu, see "Telephone Number Setup Menu" on page 56.
v Call-Out Policy Setup Menu, see "Call-Out Policy Setup Menu" on page 57.
v Customer Account Setup Menu, see "Customer Account Setup Menu" on page 58.
v Call-out Test, see "Call-Out Policy Setup Menu" on page 57.
v Ring Indicate Power-On Menu, see "Ring Indicate Power-On Menu" on page 50.
Modem Configuration Menu
Two entries at the top of the Modem Configuration Menu display the status of the
current selections. Selections are made in the two sections labeled Modem Ports and
Modem Configuration File Name. Select the serial port that you want to activate and
then select the modem configuration file for the modem on the port. To set up both
serial ports with modems, make your selections one port at a time.
For information on choosing a modem configuration file, see "Sample Modem
Configuration Files" on page 169 and "Transfer of a Modem Session" on page 173.
54
User's Guide
languages other than English.
CALL-IN/CALL-OUT SETUP MENU