Loading And Unloading The 3.5-Inch Diskette; Using The Cd-Rom Drive - IBM RS/6000 User Manual

Loading and Unloading the 3.5-Inch Diskette

To load a diskette into the drive, insert the diskette in the diskette drive with the labeled
metal shutter first. Push the diskette into the drive until you hear a click. The click
indicates that the diskette is securely in position in the drive.
To unload the diskette, push the diskette-unload button. The diskette unloads partially
from the drive. Remove the diskette.

Using the CD-ROM Drive

CAUTION:
A Class 1 laser is contained in the device. Do not attempt to operate the device
while it is disassembled. Do not attempt to open the covers of the device, as it is
not serviceable and is to be replaced as a unit.
This section describes the features of the 32X SCSI-2 CD-ROM Drive and provides
instructions for handling the drive and CD-ROM discs. The CD-ROM is a half-high,
5.25", 8-bit, single-ended, tray-loading drive. Its features include the following:
v SCSI-2 interface supports both synchronous and asynchronous data transfer
v High-speed data transfer rate of 2100 KB per second (14X) at inner diameter and
4800 KB per second (32X) at outer diameter due to constant RPM spin rate
v High-speed synchronous burst rate of 10 MB per second
v Average random access time of 90 ms
v Loading tray accommodates both 8 cm discs (in the horizontal orientation only) and
12 cm discs
v Reads multi-session discs
v Reads CD-recordable discs
v Reads CD-RW discs
v Supports all major CD-ROM formats: Mode 1, Mode 2, XA, CDDA, and audio
v Contains headphone output and line output for audio
14
User's Guide