Client Addr
Server Addr
Gateway Addr
Subnet Mask
Save
If any of the addresses is incomplete or contains a number other than 0 to 255, an error
message displays when you select the Save icon. To clear this error, correct the
address and select Save again.
Attention:
gateway IP address to [0.0.0.0].
To change an address, press the backspace key on the highlighted address until the
old address is completely deleted. Then enter the new address.
Ping
The Ping icon allows you to confirm that a specified address is valid by sending a test
transmission to that address.
88
User's Guide
Remote IPL Setup
000.000.000.000
000.000.000.000
000.000.000.000
255.255.255.000
If the client system and the server are on the same subnet, set the
Exit