Add Resource To Resource List - IBM RS/6000 User Manual

v Configure Service Processor
v Configure Surveillance Policy
v Create Customized Configuration Diskette
v Delete Resource from Resource List
v Disk Maintenance
v Display Configuration and Resource List
v Display Firmware Device Node Information
v Display Hardware Error Report
v Display Hardware Vital Product Data
v Display Machine Check Error Log
v Display Microcode Level
v Display or Change Bootlist
v Display or Change Diagnostic Run Time Options
v Display Previous Diagnostic Results
v Display Resource Attributes
v Display Service Hints
v Display Software Product Data
v Display System Environmental Sensors
v Display Test Patterns
v Download Microcode
v Fibre Channel RAID Service Aids
v Flash SK-NET FDDI Firmware
v Format Media
v Generic Microcode Download
v Local Area Network Analyzer
v Log Repair Action
v Periodic Diagnostics
v PCI RAID Physical Disk Identify
v Process Supplemental Media
v Run Diagnostics
v Run Error Log Analysis
v Run Exercisers
v Save or Restore Hardware Management Policies
v Save or Restore Service Processor Configuration
v SCSI Bus Analyzer
v SCSI Device Identification and Removal
v SCSD Tape Drive Service Aid
v Spare Sector Availability
v SSA Service Aid
v Update Disk Based Diagnostics
v Update System or Service Processor Flash
v Update System Flash
v 7135 RAIDiant Array Service Aids
v 7318 Serial Communication Network Server

Add Resource to Resource List

Use this task to add resources back to the resource list.
114
User's Guide