Call-In/Call-Out Setup Menu - IBM Intellistation POWER 9112 265 User Manual

Call-In/Call-Out Setup Menu

This menu is used to configure a modem for the service processor to use to support the
system.
1. Modem Configuration Menu
2. Serial Port Selection Menu
3. Serial Port Speed Setup Menu
4. Telephone Number Setup Menu
5. Call-Out Policy Setup Menu
6. Customer Account Setup Menu
7. Call-Out Test
8. Ring Indicate Power-On Menu
98. Return to Previous Menu
99. Exit from Menus
1>
v Modem Configuration Menu, see "Modem Configuration Menu" on page 42.
v Serial Port Selection Menu, see "Serial Port Selection Menu" on page 42.
v Serial Port Speed Setup Menu, see "Serial Port Selection Menu" on page 42.
v Telephone Number Setup Menu, see "Telephone Number Setup Menu" on page 43.
v Call-Out Policy Setup Menu, see "Call-Out Policy Setup Menu" on page 45.
v Customer Account Setup Menu, see "Customer Account Setup Menu" on page 46.
v Call-out Test, see "Call-Out Policy Setup Menu" on page 45.
v Ring Indicate Power-On Menu, see page 33.
CALL-IN/CALL-OUT SETUP MENU
Chapter 3. Using the Service Processor
41