Table of Contents
Advertisement
• MT200 Electronic Console:
Power on
When initially powered on the console will perform an internal self-test. During this time all the
lights will turn on for a short time. The message window will display a software version (i.e. VER
1.0) and the distance window will display an odometer reading indicating how many virtual miles
(or Kilometers) the treadmill has gone. The time window displays how many hours the treadmill
has been used.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display, also known as Idle Mode. The dot matrix display will be scrolling through the different
program profiles and the message window will be scrolling the start up message. You may now
begin to use the MT200.
The console will automatically power down after 20 minutes of inactivity. Press any key to wake
the console up again. To disable this function so console always remains powered on see
Maintenance section on page 35. Always turn off the main power switch when the MT200 is not in
use.
8
MT200
Advertisement
Table of Contents
