Spirit MT200 User Manual page 24

Step 2: Console Frame Assembly
• Install the two mounting brackets (3 & 4) with the six M8 x 12mm screws (108). Refer to the
important instructions on the following page for this step.
• Mount the console frame (5) to the upright tubes (18 & 19) with six 3/8" x 3/4" bolts (153),
3/8" split washers (58) and 3/8" flat washers (59). Be careful not to pinch the computer
cables.
• Firmly tighten the six bolts (104) at the bottom of the uprights and install the two end caps
(32 & 33) with the four M5 x 12mm screws (73).
23
MT200