Operation Of Your New Treadmill; Console Operation - Spirit MT200 User Manual

Console Operation:

1. Set Up
The Set Up key function will allow you to enter patient data and customize the settings of the
MT200. When the Set Up key is pressed the first option in the menu appears. Use the up/down
arrows to scroll through the menu and press the enter key to select an option.
Set Up menu:
1. Patient Data:
• Age: used in Vo2 and heart rate programs.
• Gender: used in Vo2 program.
• Weight: used in METs and Calorie calculations and Vo2 program.
• Height: used in the Symmetry program.
2. Deck Lift Mode:
• This mode allows you to raise the entire deck parallel to the floor. In this mode the
deck, rear step and hand rails can be used for step-up, step-down, stretching and
PNF/PTA exercises.
• Instructions for raising deck and step height chart:
1. Press Set Up key at top left of console. Use Up arrow on keypad to Deck Lift
2. Now Press Start key. Message window will show that Deck Lift mode is
3. When finished press Stop to reset the deck lift mode so incline keys will return
4. Deck height chart:
Deck Level #
0
1
2
3
4
5
6
7
8
9
10
option and press the Enter key. Use the Up arrow to select ON option and
press Stop twice to exit.
enabled. Use the Incline keys to raise the entire deck. There are 10 levels
available and height of the deck for each level is below.
to normal operation. To use deck lift function you must enable it each time
through the Set Up key.
Step to Deck Height
5 " (12.7 cm)
5-1/2" (14.0 cm)
5-3/4" (14.6 cm)
6" (15.25 cm)
6-1/2" (16.5 cm)
6-3/4" (17.1 cm)
7" (17.75 cm)
7-1/4" (18.4 cm)
7-1/2" (19.0 cm)
8" (20.3 cm)
8-1/4" (21.0 cm)
Floor to Deck Height (floor to step = 4")
9" (22.9 cm)
9-1/2" (24.0 cm)
9-3/4 (24.75 cm)
10" (25.4 cm)
10-1/2" (26.7 cm)
10-3/4" (27.3 cm)
11" (27.9 cm)
11-1/4" (28.58 cm)
11-1/2" (29.2 cm)
12" (30.5 cm)
12-1/4" (31.1 cm)
9
MT200