Using The Alarm - Norstar Compact ICS 6.0 Manual

172 / Using the Hospitality features
4. Press VIEW . The set displays Alrm: 07:00am OFF: .
If the alarm time is correct, press the ON/OFF display key.
If you want to change the time, enter a new four-digit alarm time.
If the clock uses a 24-hour format, enter an hour between 00 and 23,
and minutes between 00 and 59. The set displays: Alarm ON hh:mm
If the clock uses a 12-hour format, enter the time, then when the set
displays: hh:mm AM or PM? , press AM or PM . The set displays: Alarm ON
hh:mm .
¨
5. Press

Using the alarm

To set an alarm on a digital telephone:
1. Press
² ¡ à Þ .
2. Do one of the following:
If the alarm is correct, press ON/OFF .The set displays: Alrm:07:00am
ON . Press DONE to exit.
If you need to change the alarm time, press CHG . The set displays:
Enter time:
3. To enter a new time, do one of the following:
If the clock uses a 24-hour format, enter an hour between 00 and 23,
and minutes between 00 and 59. The set displays: Alarm ON hh:mm
If the clock uses a 12-hour format, enter the time, then when the set
displays: hh:mm AM or PM? , press AM or PM . The set displays: Alarm ON
hh:mm .
To set an alarm on an analog set:
1. Press ˚
2. Enter a four-digit alarm time:
If the clock uses a 24-hour format, enter an hour between 00 and 23,
and minutes between 00 and 59. A tone sounds.
If the clock uses a 12-hour format, enter the time, then press
select am or
To enter a new time, repeat the above steps and enter a new time. This
overwrites the existing entry.
Compact ICS 6.0 System Coordinator Guide
to exit.
The displays shows Alrm:07:00 OFF
¥ ¡ à Þ
£
to select pm. A tone sounds.
. A tone sounds.
¥
to
P0992670 03