Cond Pswd; Room/Desk Information - Norstar Compact ICS 6.0 Manual

166 / Using the Hospitality features
5. Press ≠ .
6. Desk pswd:4677 displays.
7. Press CHANGE .
8. New pswd: displays
9. Enter a new password, then press OK .

Cond pswd

Change this password frequently, to maintain security.
1. Place the appropriate programming overlay on the set you are using to
do programming.
² ¥ ¥ Û ß ß Ü Ý Ý
2. Press
Password: .
Û Ü ß Ý ß
3. Press
Terminals&Sets .
4. Press ' until the display shows Hospitality .
5. Press ≠ .
6. Press '
7. Cond pswd:None displays.
8. Press CHANGE .
9. New pswd: displays
10. Enter a new password, then press OK .

Room/desk information

There are two aspects to programming room information.
• First you must program specific DNs to a specific room and set up the
room occupancy filters, which determine what types of calls can be
made from a room set at various states of occupancy.
Note: You can assign up to five DNs to the same room number.
• Then you need to administer the room occupancy and state of the
room.
Compact ICS 6.0 System Coordinator Guide
(CONFIG). The display shows
(ADMIN). The display shows
P0992670 03