Ending A Session - Norstar Compact ICS 6.0 Manual

Ending a session

Display digits:Y
CHANGE
End of session
The system goes ahead with any changes you make to
programming as soon as you move away from a setting, either by
using the navigation buttons or
You can see if the changes you have made to telephone
programming have taken effect by pressing the UPDATE display
key. The display shows you how many telephones have not been
updated.
Press DNs to see the specific extensions where programming
changes have not taken effect yet. Items disappear from the list
as they are updated.
Record any changes you make in the Norstar Programming
Record. If there is a problem with the system, the installer needs
to see a history of the changes you have made. Remember to
inform people in your office of any changes you have made that
affect them. For example, you may change system speed dial
codes or change the number of rings before an unanswered
telephone is forwarded.
P0992670 03
Getting started with Norstar / 25
¨
Press to end the session.
After a few seconds, the time and date reappears
on the display.
¨
.
Compact ICS 6.0 System Coordinator Guide