Parking A Call; Retrieving A Parked Call; Using Call Park - Norstar Compact ICS 6.0 Manual

Not in service
CALLBACK
Release a call
For other displays, see ''Common feature displays'' on page 229.

Parking a call

You can suspend a call so that it can be retrieved from any telephone in
your system.
² à Ý
1. Press
2. Use the Page feature (
retrieval code displayed by your telephone.

Retrieving a parked call

1. Select an internal line. (On M7100/T7100 telephones, pick up the
handset.)
2. Dial the Call Park retrieval code.

Using Call Park

When you park a call, the system assigns one of nine codes for the retrieval
of the call. These codes consist of the Call Park prefix, which may be any
digit from 0 to 9, plus a two-digit call number between 01 and 09. For
example, if the Call Park prefix is 4, the first parked call is assigned Call
Park retrieval code 401.
The Norstar system assigns Call Park codes in sequence, from the lowest
to the highest, until all the codes are used. This round-robin approach
means that a greater variety of codes are used, which makes it easier for a
call to reach the right person when more than one incoming call is parked.
P0992670 03
The telephone to which you have camped a call
is out of service or is being used for
programming. The call has come back to you.
Press CALLBACK or the line button to reconnect to
the call. On M7100/T7100 telephones, just pick
up the handset.
The line that the camped call is on is in use or
that line does not appear at your telephone.
Release the line or release an internal line.
.
² ß â
) or press PAGE to announce the
Transferring calls / 103
² à Ý
Compact ICS 6.0 System Coordinator Guide