Setting The Ring Delay Before Ccr Greeting Answers; Adding/Removing Telephones From Ccr Groups - Norstar Compact ICS 6.0 Manual

5. Press ' twice. The display shows System Answer...
6. Press ≠ .
7. Press CHANGE until you see the appropriate number of rings (between
1 and 12).
If the system is busy answering calls, the line rings until System Answer
can retrieve the call.

Setting the ring delay before CCR greeting answers

You need the programming template found at the front of this guide. See
''Getting started with Norstar'' on page 13 for more information.
² ¥ ¥ Û ß ß Ü Ý Ý
1. Press
Û Ü ß Ý ß
2. Press
3. Press " twice.
4. Press ≠ , ' , and ≠ .
5. Press ' three times. The display shows CCRˆ .
6. Press ≠ .
7. Press CHANGE until you see the appropriate number of rings (between
1 and 12).
If the system is busy answering calls, the line rings until CCR can retrieve
the call.
If CCR is programmed to answer the call in less than two rings, the call
information may not be captured and forwarded to telephones in the CCR
group.

Adding/removing telephones from CCR groups

The greeting you create for CCR tells a caller to press a number to reach a
group of telephones. You add or remove telephones from these groups
(CCR groups) in programming.
P0992670 03
.
(the default System Coordinator password).
Auto Attendant / 77
Compact ICS 6.0 System Coordinator Guide