Using The Room/Set Programming - Norstar Compact ICS 6.0 Manual

7. Press CHANGE and enter the hour (00 to 23).
If the number is less than 13, the display shows AM . Press CHANGE to select
PM , if required. Press OK to accept.
8. Press ≠ . Minutes: 00 displays.
9. Press CHANGE and enter the minutes (00 to 59).

Using the room/set programming

This section describes how the room occupancy and room condition
settings are used.
Setting dialing filters by room state
1. Press
² ¡ à á .
2. Enter the Desk admin password if you are prompted for a password.
3. The set displays: Oc of rm#: :
4. Enter the room number and press OK .
5. The set displays rrrrr:Vacant .
6. Press the CHANGE display key and select the required status for the
room set.
7. To program other rooms, press the FIND or NEXT display key and
return to step 3.
¨
8. Press
Note: Setting the room state to Vacant cancels any outstanding alarms.
Setting the room condition
You can use this feature on a room set or administration set to:
• set the room state to service done ( Srvc done )
• set the room state to Needs service ( Needs srvc )
• query the state of the room
P0992670 03
to exit.
Using the Hospitality features / 169
Compact ICS 6.0 System Coordinator Guide