An Example Of How To Turn On A Service Manually; Turning Services On And Off Using Feature Codes - Norstar Compact ICS 6.0 Manual

An example of how to turn on a Service manually

You may have Ringing service (your night service) set up to run according
to the Night Schedule. You may decide you want that ringing arrangement
to come into effect only when it is turned on and off manually.
You need the programming template found at the front of this guide. See
''Getting started with Norstar'' on page 13 for more information.
² ¥ ¥ Û ß ß Ü Ý Ý
1. Press
Û Ü ß Ý ß
2. Press
3. Press ' twice.
4. Press ≠ at Services . The display shows
Ringing Serviceˆ .
5. Press ≠ . The display shows Sched:Nightˆ .
6. Press ≠ and use CHANGE to set the Service to Manual .
Night Schedule for Ringing Service no longer follows the schedule but can
be turned on and off by using the feature code and selecting Night Ringing.
See ''Turning Services on and off using feature codes'' on page 199.

Turning Services on and off using feature codes

The master control for services is in programming. See ''Turning Services
on and off'' on page 198. Day-to-day use of Services is controlled using the
following feature codes.
² ¡ à Ú
² £ ¡ à Ú
² ¡ à Û
² £ ¡ à Û
² ¡ à Ü
² £ ¡ à Ü
P0992670 03
(the default System Coordinator password).
Turns on Ringing service. When used at the
direct-dial telephone, it activates the
alternate direct-dial telephone (extra-dial
telephone).
Turns off Ringing service.
Turns on Restriction service.
Turns off Restriction service.
Turns on Routing service.
Turns off Routing service.
Using System features / 199
.
Compact ICS 6.0 System Coordinator Guide