Norstar Compact ICS 6.0 Manual page 168

168 / Using the Hospitality features
4. Press ' until the display shows Hospitality .
5. At the Hospitality heading, press ≠ until Call restrns
displays.
6. Press ≠ . Vacant:00 displays.
7. Press CHANGE and enter the filter that defines the restrictions for your
hospitality system.
The Restriction Filters section in the Modular ICS 5.0 Installer Guide
describes how to set up filters.
8. Repeat steps 2 and 3 for the other room occupancy states.
The table below shows an example of a call restrictions setup.
Room
Occupancy
Vacant
Basic
Mid
Full
Service times
You can set the time when occupied rooms change from Service done to
Service required. This setting affects the Room condition feature.
1. Place the appropriate programming overlay on the set you are using to
do programming.
² ¥ ¥ Û ß ß Ü Ý Ý
2. Press
Password: .
Û Ü ß Ý ß
3. Press
Terminals&Sets .
4. Press ' until the display shows Hospitality .
5. At the Hospitality heading, press ≠ until Service time
displays.
6. Press ≠ . Hour: 00 displays.
Compact ICS 6.0 System Coordinator Guide
Filter Description
11 no calls allowed except 911
11 no calls allowed except 911 and internal
extensions
12 no calls allowed except 911, 1800, 188
and internal extensions
13 no call restrictions
(CONFIG). The display shows
(ADMIN). The display shows
P0992670 03