Programming The Alarm Feature - Norstar Compact ICS 6.0 Manual

170 / Using the Hospitality features
Using the room set
² ¡ à ß
1. Press
or ˚
2. At the prompt, set the status of the room.
Note: You may be required to enter a Room condition password.
Ú
Press
Û
Press
The set displays the selected prompt.
¨
3. Press
Using the admin set
² ¡ à ¡
1. Press
2. Enter the Desk admin password if you are prompted for a password.
The set displays: Cd of rm#:
3. Enter the room number and press OK .
The set displays rrrrr:Vacant .
4. To update the condition, press CHANGE and select the required status.
To query the condition of other rooms, press the FIND or NEXT displays
keys.
¨
5. Press

Programming the alarm feature

If you want to allow the room sets to program wake-up alarms, there are a
couple of program settings that need to be entered.
1. Place the appropriate programming overlay on the set you are using to
do programming.
² ¥ ¥ Û ß ß Ü Ý Ý
2. Press
Password: .
Û Ü ß Ý ß
3. Press
Terminals&Sets .
4. Press ' until the display shows Hospitality .
5. At the Hospitality heading, press ≠ until Alarm displays.
6. Press ≠ . Attn attempts:3 displays.
Compact ICS 6.0 System Coordinator Guide
on a digital set
¥ ¡ à ß
on an analog set.
to indicate Set to srv done .
to indicate Set to needs srv .
to exit.
.
to exit.
(ADMIN). The display shows
(CONFIG). The display shows
P0992670 03