1. Insert the Installation CD into the CD-ROM drive or the first installation diskette
2. From the Windows NT task bar, select
3. Select Install
4. Select the DriveDload setup executable (either e:\DriveDload\setup.exe if
5. Follow the Install Wizard instructions to complete the installation.
6. When installation is completed, remove the CD or diskette and restart the
Starting DriveDload
Use the following procedure to start DriveDload in Windows NT:
1. Have the customer stop all I/O activity to the array. Attention: Be sure the I/O
2. From the Window NT task bar, select Start
The DriveDload main panel should appear (See Figure 113 on page 241).
Using DriveDload
When you first start DriveDload, the main menu appears:
240
IBM 2102 Model F10 and Model D00 Service Guide
v In the following examples, a: is designated as the floppy disk drive,
c: is designated as the boot drive and e: is designated as the
CD-ROM drive. Be sure to select the correct drives for your system.
into the floppy disk drive.
Start
Settings
Control Panel
installing from a CD-ROM, or a:\setup.exe if installing from diskettes).
system.
from all the hosts connected to the array have been stopped, not just the I/O
coming from the host that is performing the download.
Channel Storage Manager
Add/Remove Programs.
Program Files
Service Tools
DriveDLoad.
IBM Fibre