Table of Contents
Advertisement
Figure 63. Turning Off the Power and Unplugging the Power Cord
Figure 64. Removing and Installing a Power Supply FRU
4. Unpack and install the new power supply (Figure 64).
5. Plug in the power cord and turn on the power (Figure 63).
6. Check the new power supply and other controller module LEDs for faults.
End of Procedure
Battery Harness
Battery Harness Description
The controller module contains one battery harness. The battery harness (Figure 65
on page 124) is a ribbon cable that provides a power connection between the
123
Chapter 6. Power System
Advertisement
Table of Contents
Troubleshooting
