Navigating In Ace - IBM F10 Service Manual

Table 47. ACE Drive Statuses (continued)
Status
73 - Failed drive, controller
store
76 - Incompatible drive,
controller
78 - Controller store is
invalid
79 - Controller store is
invalid
80 - Global Hot Spare on
standby
83 - Failed Global Hot Spare The Standby Global Hot Spare drive has failed.
90 - Global Hot Spare in use The Global Hot Spare drive is in use.
93 - Failed in use Global Hot
Spare
??

Navigating in ACE

To move around and select elements in ACE, use the keys shown in Table 48. The
mouse cannot be used to navigate in ACE.
Table 48. Navigating in ACE
Key
TAB
Space Bar
Down Arrow
Up Arrow
Right Arrow
Left Arrow
ENTER
U
Q
Description
The drive has experienced write errors when the array controller was unable to write
the configuration data from the subsystem to the array. Replace the failed drive as
soon as possible.
The drive has experienced write errors when the array controller was unable to write
the configuration data from the subsystem to the array. Replace the failed drive as
soon as possible.
The drive has experienced write errors when the array controller was unable to write
the configuration data from the subsystem to the array. Replace the failed drive as
soon as possible.
The drive has experienced write errors when the array controller was unable to write
the configuration data from the subsystem to the array. Replace the failed drive as
soon as possible.
This is a Global Hot Spare drive. It will immediately replace any failed drive in the
array that has the same or smaller capacity.
The active Global Hot Spare drive has failed.
ACE was not able to obtain a good status from the array. The array may not be
powered up, may not be connected properly, a driver may not be loaded, and so on.
Press <U> to attempt to update the display. If the status remains, check your
subsystem and its connecting cables.
Function in Drive Window
Moves the cursor to the Logical Unit
window.
Moves the cursor to the next available
drive in the Drive Matrix.
Moves the cursor down in the Drive
Matrix.
Moves the cursor up in the Drive Matrix.
Moves the cursor right in the Drive Matrix.
Moves the cursor left in the Drive Matrix.
Moves the cursor to the next available
drive in the Drive Matrix.
Updates or refreshes the ACE screen display. While ACE is updating, it displays the
word WORKING. ACE automatically updates the screen every 30 seconds.
Quits the current function or exits ACE.
Function in Logical Unit Window
Moves the cursor to the Drive Window.
Moves the cursor down in the Logical Unit
Status display.
v Moves the cursor down in the Logical
Unit Status display.
v Moves the cursor to each logical unit
that can be changed.
Moves the cursor up in the Logical Unit
Status display.
N/A
N/A
Executes actions.
Chapter 16. RAID Manager for DOS
221