Icom IC-F9010 SERIES Operating Manual page 53

t Push [PTT] to make a Phone call to the target telephone
station.
• The LED indicator (for Handhelds) or Transmit indicator (for Mo-
biles) lights red.
• Beeps (PiPi) sound after the Phone call is connected to the tar-
get telephone station.
• If your Phone call is not connected, push [Digital Button] (or
[Phone]) to return to normal operation.
y Push and hold [PTT] and speak into the microphone.
u Release [PTT] to receive.
i After conversation is finished, push [Digital Button] (or
[Phone]) to disconnect the Phone call and return to nor-
mal operation.
APCO P25 MODE OPERATION
D Receiving
Not available on Non-display types.
q When a Phone call is received;
• The LED indicator (for Handhelds) or Busy indicator (for Mobiles)
lights green.
• Ringers sound.
• "PHONE CALL" blinks.
• The phone number of the calling telephone station is displayed.
(Trunking mode only.)
• " " (for Handhelds) or " " (for Mobiles) blinks.
For Handhelds:
PHONE CALL
8008882345
DSEL PAGE STAT
w Speak into the microphone while pushing and holding
[PTT].
• The LED indicator (for Handhelds) or Transmit indicator (for Mo-
biles) lights red.
e Release [PTT] to receive.
r After the conversation is finished, push [Digital Button]
(or [Phone]) to hang up and return to normal operation.
For Mobiles:
P H O N E C A L L
8 0 0 8 8 8 2 3 4 5
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
50