Status Query Function - Icom IC-F9010 SERIES Operating Manual

4
APCO P25 MODE OPERATION
n Status Query function
D Transmitting
A Status Query function allows you to send a signal that
requests the last transmitted Status Message to the target
station.
The target station transceiver automatically responds after
receiving a Status Query signal.
[Digital Button] key assignment is necessary to transmit the
Status Query.
Not available on Non-display types.
q Push [Digital Button] to enter the digital call type selec-
tion mode.
w Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select "STATUS QUERY."
For Handhelds:
STATUS QUERY
DSEL PAGE
47
For Mobiles:
S T A T U S
STAT
e Push [Digital Button] again to enter the Individual ID se-
lection mode.
• A pre-programmed ID name is displayed.
• When the ID name is not programmed, the ID code is displayed.
For Handhelds:
STATUS QUERY
INDIVIDUAL1
DSEL
Q U E R Y
For Mobiles:
S T A T U S
I N D I V I D U A L 1
PAGE STAT
Q U E R Y