Radio Uninhibit Function - Icom IC-F9010 SERIES Operating Manual

4
APCO P25 MODE OPERATION
n Radio Uninhibit function
D Transmitting
A Radio Uninhibit function allows you to send a signal that
will revive the inhibited transceiver.
[Digital Button] key assignment is necessary to transmit the
radio uninhibit signal.
Not available on Non-display types.
✔ For Trunking mode operation:
This function is usable only for a dispatcher in the Trunking
mode.
q Push [Digital Button] to enter the digital call type selec-
tion mode.
w Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select "RDO UINHIBIT."
For Handhelds:
RDO UNINHIBIT
DSEL PAGE
37
For Mobiles:
R D O U I N H I B I T
STAT
e Push [Digital Button] again to enter the Individual ID se-
lection mode.
• A pre-programmed ID name is displayed.
• When the ID name is not programmed, the ID code is displayed.
For Handhelds:
RDO UNINHIBIT
INDIVIDUAL1
DSEL PAGE STAT
r Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select the desired ID (or name).
• Push and hold [Digital Button] for 1 sec. to cancel and return to
normal operation.
• The ID can be edited with the 10-keypad*. (Depending on the
pre-setting.) See p. 30 for editing details.
* 10-key types only.
t Push [PTT] to transmit the radio uninhibit signal to the tar-
get station.
• The LED indicator (for Handhelds) or Transmit indicator (for Mo-
biles) lights red.
• "PLEASE WAIT" is displayed.
y Release [PTT].
• "ACK RECEIVED" is displayed after receiving an acknowledge-
ment from the target station, and then the transceiver returns to
normal operation.
• "NO ACKNOWLDG" is displayed when an acknowledgement is
not received, and then transceiver returns to normal operation.
For Mobiles:
R D O U I N H I B I T
I N D I V I D U A L 1