Icom IC-F9010 SERIES Operating Manual page 11

(Not available on Non-display types)
DIGITAL BUTTON KEY "DSEL"
➥ Push to enter the digital call type selection mode, then
push [CH Up]/[CH Down] or rotate [CH Up/Down] to
select a desired call type from "PAGE," "RDO INHIBIT,"
"RDO UINHIBIT," "RDO MONITOR," "RDO CHECK,"
"STATUS," "SHORT MSG," "STATUS QUERY," "PHONE"
and "ANNOUNCEMENT." (p. 25)
After making the digital call type selection, push this key
again to enter the ID selection mode.
• If "STATUS" or "SHORT MSG" is selected, the transceiver dis-
plays the Status Message or Short Message selection mode
before entering the Individual ID selection mode.
• If "PHONE" is selected, the transceiver displays the phone
number selection mode.
• If no operation is performed for about 30 sec., the transceiver
returns to normal operation.
➥ Push and hold for 1 sec. to cancel and return to normal
operation.
DIGITAL STATUS KEY "STAT" (p. 43)
➥ Push to enter the Status Message selection mode.
After selecting, push again to enter the destination
Individual ID selection mode to send a Status Message.
• If no operation is performed for about 30 sec., the transceiver
returns to normal operation.
• While in the Trunking mode, the Individual ID selection mode
does not appear.
➥ Push and hold for 1 sec. to cancel and return to normal
operation.
DIGITAL PAGE KEY "PAGE" (p. 33)
➥ Push to enter the Individual ID selection mode for a Page
call. Then push [CH Up]/[CH Down] or rotate [CH Up/
Down] to select a desired Individual ID.
• Push [PTT] to transmit a Page call.
• If no operation is performed for about 30 sec., the transceiver
returns to normal operation.
➥ Push and hold for 1 sec. to cancel and return to normal
operation.
DIGITAL MESSAGE KEY "MSG" (p. 45)
➥ Push to enter the Short Message selection mode.
After selecting, push again to enter the destination
Individual ID selection mode to send a Short Message.
• If no operation is performed for about 30 sec., the transceiver
returns to normal operation.
• While in the Trunking mode, the Individual ID selection mode
does not appear.
➥ Push and hold for 1 sec. to cancel and return to normal
operation.
PHONE KEY "PHON" (p. 49)
➥ Push to enter the phone number selection mode for a
Phone call. Then push [CH Up]/[CH Down] or rotate [CH
Up/Down] to select a desired phone number.
• Push [PTT] to transmit the Phone call.
• If no operation is performed for about 30 sec., the transceiver
returns to normal operation.
➥ Push and hold for 1 sec. to cancel and return to normal
operation.
1
PREPARATION
☞ Continued on the next page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8