Figure - Proliphix IMT550c Configuration Manual

CHAPTER 2: Configuring the Thermostat Using the Web Interface
Table 2-5 Alarms - Zone Field Descriptions (Continued)
Field
Zone Humidity Alarms
Low Humidity Limit
High Humidity Limit
Filter Change Reminder
Change Interval (runtime hours)
2-22
Beta Draft Confidential
Description
Select a value or Disabled to indicate the low humidity threshold
detection status.
This value is monitored by the thermostat and compared against
the current Relative Humidity. If the current Relative
Humidity rises above this value, an alarm condition is set and
the status is displayed on the
addition, this alarm is sent to the Proliphix web site to trigger an
e-mail notification, if the function is enabled, and may also be
sent as e-mail from this thermostat if configured on Network -
Notification Settings page. See E-mail configuration on
Network Notification Settings (page
Disabled (default) – No high humidity limit is set.
0%RH to 95%RH – High Humidity Limit in 5%
increments.
This is a major (red) alarm condition.
Select a value or Disabled to indicate the high humidity
threshold detection status.
This value is monitored by the thermostat and compared against
the current Relative Humidity. If the current Relative
Humidity rises above this value, an alarm condition is set and
the status is displayed on the
addition, this alarm is sent to the Proliphix web site to trigger an
e-mail notification, if the function is enabled, and may also be
sent as e-mail from this thermostat if configured on Network -
Notification Settings page. See E-mail configuration on
Network Notification Settings (page
Disabled (default) – No high humidity limit is set.
0%RH to 95%RH – High Humidity Limit in 5%
increments.
This is a major (red) alarm condition.
Select an interval in hours to remind you that the HVAC system
requires maintenance. This feature allows you to set time
intervals between changing and/or cleaning the HVAC air filter.
If enabled, an alarm condition is set after the pre-set interval has
expired, and is displayed on the
addition, this alarm is sent to the Proliphix web site to trigger an
e-mail notification, if the function is enabled, and may also be
sent as e-mail from this thermostat if configured on Network -
Notification Settings page. See E-mail configuration on
Network Notification Settings (page
This is a minor (yellow) alarm condition.
Internet Managed Thermostat Configuration Guide, Release 1.0
HVAC (page 2-2) page. In
2-42).
HVAC (page 2-2) page. In
2-42).
HVAC (page 2-2) page. In
2-42).
Part No. 600-03001-550, Rev. 1