CHAPTER 2: Configuring the Thermostat Using the Web Interface
Use
Table 2-15 Admin - Date and Time Field Descriptions
Field
Network Time
Synchronization
Network Time Protocol (NTP)
NTP Timeserver
Thermostat Timezone
Timezone of Thermostat
Observe DST
Manually Set Date and Time
New Date
New Time
Use web browser date and time
Installer Information
The Installer Information page contains contact information for the installer. Enter
the information as necessary.
Figure 2-34 Admin - Installer Information Page
2-46
Table 2-15
to configure the Admin - Date and Time fields.
Internet Managed Thermostat Configuration Guide, Release 1.0
Beta Draft Confidential
Description
Enabled
Disabled
Displays the current timezone.
Click to adjust the time for Daylight Savings Time.
Enter a new date.
Enter a new time.
Click to use configure date and time using browser date and
time.
Part No. 600-03001-550, Rev. 1
Need help?
Do you have a question about the IMT550c and is the answer not in the manual?
Questions and answers