Proliphix IMT550c Configuration Manual page 61

Beta Draft Confidential
Table 2-12 Network - Remote Access Field Descriptions (Continued)
Field
Remote Server Configuration
Remote Access
Server Address
Interval
Last Attempt
Callhome Attempt State
Push Server State
Last Success
Last Change Upload
Last Observation Upload
Internet Managed Thermostat Configuration Guide, Release 1.0
Part No. 600-03001-550, Rev. 1
Description
Controls whether the Remote Server service is enabled. Remote
access is the term used to describe the management and control
of the thermostat from networks outside the local subnet on
which the thermostat resides. Remote access provides the
thermostat with the ability to be controlled from across the
Internet (with the Proliphix UEM).
Disabled (default) – Remote Server function is disabled.
Enabled – The thermostat is enabled to participate with the
Proliphix UEM server.
Displays the IP address or DNS name of the remote server.
Specifies the frequency of thermostat "calling home" to the
Proliphix server.
Clicking Call Home forces the intercommunication between the
thermostat and the remote server.
mm.dd.yyyy – Date of last attempt to access the remote
server.
hh.mm.ss – Time since last attempt to access the remote
server.
Displays the status (Success or Fail) of last attempt to initiate the
communication to the remote server.
Displays the date and time of last successful communication
with the remote server.
Displays the date and time the last change was made to the
thermostat configuration.
Network Page
2-41