Hitachi J300 Series Instruction Manual page 48

Monitor
mode
contents
Frequency
converted
value
monitor
Trip
monitor
Trip
history
monitor
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
The product of the value of frequency converted value setting (A47) and that of output frequency
(d0) is displayed on the monitor.
FUNC
FUNC
When a trip occurs, the cause of the trip is displayed in this code. As a general display,
the contents of the latest trip are displayed. Whenever the
of each is displayed.
FUNC
Trip cause
NOTE 1: When there is no trip,
NOTE 2: The above example of the voltage between P(+) and N(-) indicates 390 to 399 V.
NOTE 3: When the
is displayed.
The causes of the last trip and the last trip but one are displayed. When the command is displayed
and the key is pressed, the trip cause is displayed.
FUNC
FUNC
Cause of the last trip
NOTE 1: When there is not a trip history,
NOTE 2: How to delete trip history data, see page 7-14.
Contents and display
(1)
to
. .
(2)
to
.
(3)
to
.
(4)
to
(5)
to
FUNC
Trip current
key is pressed after a trip occurs,
STOP/RESET
FUNC
Cause of the last trip
but one
FUNC
7-8
0.0 to 9.99
10.00 to 99.99
.
100.00 to 999.99
.
1000.00 to 9999.99
10000.00 to 39960.00
key is pressed, the content
FUNC
FUNC
Voltage between trips
P and N
(Note 2)
is displayed.
.
is displayed.