Hitachi J300 Series Instruction Manual page 106

(Function mode 1)
Display
Function
sequence
No.
38 F-47
Option
PCB error selection for
setting
39 F-48
Selection RYA
of relay
output
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
(Function mode 2)
Function Initialization display
name contents
Main body OP-ERR1
operation
option PCB
error 1
Main body OP-ERR2
operation
selection for
option PCB
error 2
Setting for RELAY RYA
terminal
Setting for RELAY RYB
RYB
terminal
Setting for RELAY RYC
RYC
terminal
Setting, change
Initialization
STP STP STP/RUN
STP STP STP/RUN
RUN RUN CST/PAT
/ANY/RUN
/OTQ/NOR
CST CST
OTQ OTQ
12-15
Setting contents
contents
Effective with option board
Effective with option board
(J-RY)
CST: Arrival signal
(constant speed)
PAT: Arrival signal
(set frequency or more)
ANY: Arrival signal
(set frequency only)
RUN: Running signal
OTQ: Over torque signal at
SLV, SLV2/Overload
signal at V/F control
NOR: No output