Key Description - Hitachi J300 Series Instruction Manual

7.3

Key Description

Data display
2
1
Code display
UP/DOWN key
FUNC
[Function key] . . . This key allows the selection of commands and memorizes parameters.
FUNC
.
[RUN key] . . . This key starts the run.
RUN
STOP/RESET
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
The key are used to select the code and change the data. When
the
1
first and then
key is pressed once again when
returned to
If an optional code is selected when
FUNC
When this key is pressed once in the state of
data state is set. When the key is pressed once in the state of
the extension function code selection state is set.
.
2
1
FUNC
.
2
1
.
screen transition
The set value of F4 determines a forward run or a reverse run.
[STOP/RESET key] . . . This key stops the run.
key is pressed once, the monitor mode
,
.
key is pressed, the extension function mode can be selected.
FUNC
Select the extension
function code.
screen transition
When a trip occurs, this key becomes the reset key.
7-2
, , are one by one. If the
••••
is displayed, the display is
is displayed and the
2
1
A setting method which
is the smame as that for
used for the subsequent
screen transition.
is displayed
1
, , the
,
FUNC
to is