Bypass Menu; Acquire Test Menu; Reset Gps Menu; Gps Hot Key - KoamTac KDC100 User Manual

5.2.3 Bypass Menu

 This option should be disabled if users want to record the GPS data with a scanned barcode data.
 KDC250 would bypass GPS data to the host if the bypass option is enabled

KDC250 becomes Bluetooth GPS receiver if this bypass data option is selected

5.2.4 Acquire Test Menu

 GPS signal acquiring time test

5.2.5 Reset GPS Menu

 Reset GPS settings
5.3

GPS Hot Key

KDC250 provides the following hot keys for convenient GPS operations.
GPS Power Enable
 Users can turn on the GPS power by pressing the scan button if auto power off is enabled and
GPS power is disabled.
 Users should keep pressing the scan button for more than 3 seconds to turn on the GPS power.
GPS Bypass mode Enable/Disable
 Users can toggle GPS Bypass mode by pressing the scan button if GPS power is enabled.
 Users should keep pressing the scan button for more than 3 seconds to toggle GPS bypass mode.
GPS Acquire test cancellation
 Users can cancel GPS acquire test by pressing the scan button during the test
GPS Data append cancellation
 Users can cancel GPS data append by pressing the scan button if GPS data is not available
immediately.
 Users should keep pressing the scan button for more than 3 seconds to cancel GPS data append.
76
Revision 3.05.R6
Copyright ® 2013, KoamTac, Inc.
KDC User Manual