Configure Kdc; Figure 11 – Location Of Kdc Menu And Use Of Buttons (Kdc100/200/250/300) - KoamTac KDC100 User Manual

3.1.3 Configure KDC

The KDC is designed to meet the data collection requirements of many different industries in a
variety of dynamic situations. To perform well in these diverse environments, the KDC is
designed to be configured easily and quickly. But, to perform at its maximum level, the KDC
must be configured properly. Until you are familiar with configuring the KDC, it is recommended
that you DO NOT modify the KDC settings. The KDC can be configured using three different
methods which are explained in Section 3.3 – KDC Menus, Chapter 4 –Synchronization, and
Appendix C/D – Special Barcodes.
CONFIGURATION METHODS FOR THE KDC100/200/250/300/350
KDC Menu

®
KTSync Software

Special Barcodes

Figure 11 – Location of KDC Menu and use of buttons (KDC100/200/250/300)
Press Up and DOWN Scroll Buttons
simultaneously to access the KDC menu.
Move the menu bar up and down by
pressing Up and Down Scroll Buttons.
Select one of the menus by
pressing Scan Button.
38
Revision 3.05.R6
Copyright ® 2013, KoamTac, Inc.
KDC User Manual