Ipsec Configuration; Select Tunnel To View/Modify; Enable Tunnel 1; Remote Ip Address Range - Patton electronics SL4020 Getting Started Manual

SmartLink 4020 Getting Started Guide
4 • Network—WAN
IPSec Configuration
This page allows configuration of the device's IPSec (IP security) settings.
Figure 13. IPSec Configuration window

Select Tunnel to view/modify

Select the desired tunnel from the pop-up menu. The following sections and examples assume Tunnel 1
was selected.

Enable tunnel 1

Enable/disable tunnel 1 IP sec

Remote IP Address range

Start and end of remote IP address range.

Remote security gateway

Remote security gateway IP address

Security Mode

IPSec mode (tunneling/transport)

Outbound AH SPI (DEC)

Outbound AH security parameter index number.

IPSec Configuration

38