SmartLink 4020 Getting Started Guide
Auto Upgrade Protocol
Select the protocol for auto upgrade
Upgrade Server
Specify the auto upgrade server IP address
Auto Upgrade URL
Specify the auto upgrade server by URL. This field is dependent on the auto upgrade service package installa-
tion. The default value is iadmgr.
Localization
The Localization window contains the following sections:
•
Call Progress Tones (see
•
Distictive Ring Setting (see
•
Supplementary Service Keys (see
•
Control Timer Values (see
•
Ring Setting (see
figure 47
•
Miscellaneous (see
figure 48
•
FXS Port Polarity (see
Note
After configuring the sections, click the
page 76) to save the new configuration.
Call Progress Tones
Choose the correct country for a proper impedance match, as well as the NTP Server, and Time Zone. Select
Adjust clock for daylight savings if applicable.
Localization
figure
43)
figure 44
on page 71)
figure 45
on page 72)
figure 46
on page 74)
on page 75)
on page 75)
figure 49
on page 76)
Figure 43. Call Progress Tones section of Localization window
button (see
figure 49
Save
7 • System
on
70