Introduction; Bellcore Standard Ring Cadence Patterns - Patton electronics SL4020 Getting Started Manual

SmartLink 4020 Getting Started Guide

Introduction

The following is a sample ring cadence patter configuration:
Timeval ::= time in milliseconds
Repeatval ::= # of cycles to repeat
Tonename ::= "RING_0" | "RING_1" | "RING_2" | "RING_3" | "RING_4"
| "RING_5" | "RING_6" | "RING_7" | "RING_8" | "RING_9"
Idle ::= "IDLE"
Active ::= "ON" | "OFF"
Inactive ::= Idle "(" Timeval ")"
Active ::= Active "(" Timeval ")"
Sequence ::= Active | Active "," Sequence
Repetition ::= "[" Sequence "]" Repeatval
Repeat ::= "R"
Cycle ::= Sequence | Repetition
Fullsequence ::= Cycle | Cycle "," Fullsequence
Cadence ::= Fullsequence | Fullsequence "," Repeat | Fullsequence
"," Inactive "," Repeat
Ring ::= Cadence
For the ring cadence pattern above, the configuration would be:
RING_0 ON(200),OFF(300),ON(100),OFF(400),ON(200),OFF(4000),R
Note The Bellcore standard ring cadence patterns are shown in
Name
RING_0
RING_1
RING_2
RING_3
RING_4
RING_5
Introduction
Table 3. Bellcore standard ring cadence patterns
ON(2000), IDLE(4000), R
ON(800), OFF(400), ON(800), IDLE(4000), R
ON(400),OFF(200)]2,ON(800),IDLE(4000),R
ON(300), OFF(200), ON(1000), OFF(200), ON(300), IDLE(4000), R
ON(500)
E • Ring Cadence Configuration
table 3.
Value
97