Table of Contents
Advertisement
SmartLink 4020 Getting Started Guide
4 • Network—WAN
Status
Interface Status
Figure 5. Internet Status window
Enabled
Yes indicates the WAN interface is enabled and ready to be used.
Service
Either Routed or Bridged, displays the level of your WAN interface's connection.
Protocol
Indicates that the Ethernet protocol is being used to transfer data.
Interface Status
Either Up or Down.
Network Settings
These are the details of your WAN network settings.
Dynamic IP Assignment
Displays Yes (via DHCP) if you are using a dynamic IP address or No if a dynamic IP address is not being used.
IP address
The IP address of the SmartLink on the WAN.
MAC address
The MAC address of the WAN Ethernet interface in the SmartLink.
Status
31
Advertisement
Table of Contents
