Table of Contents
Advertisement
SmartLink 4020 Getting Started Guide
Installing the router
Do the following:
Power adapter
Power
12V, 1A
Power jack
Place the unit on a desktop or similar sturdy, flat surface that offers easy access to the cables. The unit
1
should be installed in a dry environment with sufficient space to allow air circulation for cooling.
Note
For proper ventilation, leave at least 2 inches (5 cm) of clearance at the sides,
front, and rear of the unit.
Set your LAN Local Area Connection Properties for Internet Protocol (TCP/IP) to Obtain an IP address
2
automatically and to Obtain DNS server address automatically.
WARNING
CAUTION
Plug in the telephone or telephones (see
3
Plug in the PC or LAN, or a LAN hub/switch.
4
Installing the router
Internet Service
Provider
6
5
WAN
Reset button
WAN port
Figure 2.
SmartLink 4020
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
The Interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and mechani-
cal serviceability
figure
PC or
LAN
--or--
LAN
Hub/Switch
4
www.patton.com
10/100 Ethernet
LAN
LAN port
Phone jack 1
installation diagram
2).
2 • SmartLink installation
Phone
3
Phone
1
2
Phone jack 2
23
Advertisement
Table of Contents
