Setting The Dial Tone Detection - Konica Minolta 240f User Manual

4.1 Initial setup (User install)

Setting the dial tone detection

Select if you set the dial tone detection. Select [OFF] normally.
1
Press <Setting>.
2
Press [Management].
% If an administrator password is set, enter the password and press [Enter].
3
Press [User Install].
4
Press [Dial Tone Detect].
5
Select [ON] or [OFF] to detect or not detect the dial tone, and
press [Enter].
% If you select [ON], you cannot transmit the faxes through a
line that cannot acquire a dial tone.
Konica Minolta 240f
4
4-9