Redialing; Transmitting To Multiple Recipients (Broadcast) - Konica Minolta 240f User Manual

4
4.2.3

Redialing

"Redialing" refers to the process of transmitting to a previous destination again. The machine supports the
following two types of redialing:
- Manual redialing
- Automatic redialing
d
You cannot use manual redialing or automatic redialing when performing manual transmission.
Manual redialing
The machine memorizes the latest 10 destinations transmitted to using the numeric keys. You can recall the
memorized numbers to transmit a fax again. For details on the procedure, refer to page 6-13.
Automatic redialing
When transmission was not successful during automatic transmission because the line was busy, the number
is automatically redialed at regular interval.
If the transmission was not successful even after the set number of redials, the document stored in the mem-
ory will be deleted and the error message will be printed.
d
Redialing cannot be performed with real time transmission.
The automatic redialing frequency and interval can be set from 0 to 15 times and 0 to 5 minutes, respectively.
For details on changing the settings, refer to page 8-33.
For details on canceling a transmission waiting for redialing, refer to page 4-23.
4.2.4

Transmitting to multiple recipients (Broadcast)

This function enables you to transmit the same fax to many destinations in one operation, thereby eliminating
the need to scan and transmit the fax for each destination.
d
If you want to transmit to address book destinations or groups, enable the Broadcast function. If you want to
specify destinations using other methods, you can specify multiple destinations even if the Broadcast func-
tion is disabled.
You can specify up to 2,000 fax destinations and 2,000 e-mail destinations, including both address book des-
tinations and groups. You can specify up to 30 fax destinations using the numeric keys and 30 e-mail ad-
dresses entered manually.
You can change the default value to always have broadcast transmission enabled. For details, refer to
page 4-7.
1
Load the document, and press <Fax>.
% For details on loading documents, refer to Chapter 2,
"Loading Documents" in the Quick Guide.
% Set the resolution and contrast as necessary. For details,
refer to page 4-18.
4-16
Basic faxing 4.2
Konica Minolta 240f