Setting The Contrast - Konica Minolta 240f User Manual

2
4
Specify the destination, and press <Start>.
% For details on the procedure, refer to page 2-3.
% If you loaded the document in the ADF, this concludes the procedure.
% If you loaded the document on the document glass, load the next document, and press [Next Doc].
To finish scanning, press [Complete].
2.2.2

Setting the contrast

Set the contrast to scan with according to the document.
Option
Lightest
Lighter
Normal
Darker
Darkest
1
Load the document, and press <Scan>.
% For details on loading documents, refer to Chapter 2,
"Loading Documents" in the Quick Guide.
2
Press [Contrast].
% If [Contrast] is not displayed, press [Advanced] and then
select [Contrast].
2-16
Description
Select to scan with the lightest contrast.
Select to scan with a contrast between the normal contrast and the lightest contrast.
Select to scan with the normal contrast.
Select to scan with a contrast between the normal contrast and the darkest contrast.
Select to scan with the darkest contrast.
Basic scan settings
Konica Minolta 240f
2.2