Konica Minolta 240f User Manual page 48

3
Using a registered file name
1
Load the document, and press <Scan>.
2
Press [File Name].
% If [File Name] is not displayed, press [Advanced] and then select [File Name].
3
Press [List].
4
Select the file name you want to use.
5
Edit the file name as necessary, and press [Enter].
% For details on entering characters, refer to Chapter 2, "En-
tering Characters" in the User's Guide Administrator Oper-
ations.
% If you do not want to edit it, proceed to step 6.
6
Specify the destination, and press <Start>.
% For details on the procedure, refer to page 2-3.
3-20
Advanced scan features
Konica Minolta 240f
3.2