Transmitting Faxes To A Fax Server (E-Mail Gateway) - Konica Minolta 240f User Manual

5.3 Various fax functions
7
Specify the destination, and press <Start>.
% For details on specifying the destination, refer to page 6-3.
d
After scanning the document, you can check or delete the reserved transmission by pressing <Job Confirm.
) Fax Cancel>. For details, refer to page 4-22.
To change the specified time after scheduling the transmission, you need to delete the scheduled transmis-
sion and then set it again.
5.3.4

Transmitting faxes to a fax server (E-mail gateway)

You can transmit to a fax server as if you were transmitting to a regular telephone line. The e-mail gateway
settings need to be registered in advance.
For details on registering an e-mail gateway, refer to Chapter 3, "Specifying the Network Settings" in the Us-
er's Guide Administrator Operations.
d
This function cannot be used in the following cases:
Real time transmission
Polling reception.
F-Code transmission
Closed transmission
ID check transmission
1
Load the document, and press <Fax>.
2
Press [Advanced].
3
Press [E Gateway].
4
Select [ON] and press [Enter].
% Press [OFF] to disable the e-mail gateway settings.
5
Press [Close].
6
Specify the destination, and press <Start>.
% For details on specifying the destination, refer to page 6-3.
Konica Minolta 240f
5
5-13