Searching For Server Destinations - Konica Minolta 240f User Manual

6.1 Specifying destinations
6.1.2

Searching for server destinations

You can search for and select destinations from an LDAP (Lightweight Directory Access Protocol) server and
address book destinations. There are two methods for searching for destinations; "simple search", which en-
ables you to search by entering part of the destination, and "advanced search", which enables you to search
by setting detailed conditions.
d
Register the LDAP server in advance. For details on the procedure for registering servers, refer to Chapter 3,
"Specifying the Network Settings" in the User's Guide Administrator Operations.
Simple searching
Enter part of the name or e-mail address to search for.
1
Press [Search] on the [e-mail] tab of the scanner screen or
[Search] on the fax screen.
2
Enter part of the name or the e-mail address to search for, and
press [Execute].
% Up to 30 characters can be entered.
% For details on entering characters, refer to Chapter 2, "En-
tering Characters" in the User's Guide Administrator Oper-
ations.
% You can press [Server] on the search screen to change the
server to perform searching. Normally perform searching
using the specified server.
3
Select the destination to specify from the search results, and
press [Enter].
% You can select multiple destinations.
% If you performed searching from the fax screen, you can
press [Fax] or [e-mail] to display only fax number or e-mail
address destinations.
% If there are no corresponding destinations, no destinations
are displayed.
% To further search within the search results, press [Nar-
rowList], and repeat steps 2 and 3.
% To perform another search, press [NewSearch], and repeat
steps 2 and 3.
Konica Minolta 240f
6
6-7