Konica Minolta 240f User Manual page 139

5.4 F-code communications
7
To set the box name, press [Box Name].
% If you do not want to set it, proceed to step 9.
8
Enter the box name, and press [Enter].
% For details on entering characters, refer to Chapter 2, "En-
tering Characters" in the User's Guide Administrator Oper-
ations.
9
To set a password, press [Password].
% If a password is not set, proceed to step 11.
10
Enter the password using the numeric keys, and press [Enter].
11
To set the Rx Protect function, press [Rx Protect].
12
Select [ON], and press [Enter].
% If you select [OFF], the Rx Protect setting is disabled.
% If you select [ON], proceed to step 17.
13
To set the Auto Print function, press [Auto Print].
% If you do not want to set it, proceed to step 15.
Konica Minolta 240f
5
5-23