Basic Faxing; Transmitting Faxes - Konica Minolta 240f User Manual

4
4.2

Basic faxing

4.2.1

Transmitting faxes

This section describes the often-used basic procedure for transmitting faxes.
1
Load the document, and press <Fax>.
% For details on loading documents, refer to Chapter 2,
"Loading Documents" in the Quick Guide.
% Set the resolution and contrast as necessary. For details,
refer to page 4-18.
2
Enter the number of the destination.
% Dialing options can be inserted. For details, refer to
page 4-20.
% Destinations can also be selected from the address book.
% For details on specifying other destinations, refer to
page 6-3.
3
Press <Start>.
If you loaded the document in the ADF, this concludes the procedure.
4
If you loaded the document on the document glass, load the
next document, and press [Next Doc].
% Press [Tx Start] to start transmission.
5
Repeat step 4 to scan all the documents.
% To finish scanning, press [Tx Start].
d
For details on canceling transmission, refer to
Transmissions can be reserved while the machine is communicating. The reserved transmission will start
when the current job is completed. Up to 100 transmissions can be reserved.
4-14
page 4-22 .

Basic faxing

4.2
Konica Minolta 240f